IBoard Pro

Model: IM120724002

Availability: In stock

Regular Price: $39.90

Special Price: $34.50

Save: 14%

Quick Overview

The Iboard Pro is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, ITDB02 Serial/Parallel LCD module interface, RTC, nRF24L01+ module interface, Micro SD socket and an ATMega2560. This board will add wireless XBee control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!
IBoard Pro -	Enhanced Ethernet Development Platform based on Arduino

Description

Overview

The IBoard Pro is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, ITDB02 Serial/Parallel LCD module interface, RTC, nRF24L01+ module interface, Micro SD socket and an ATMega2560. This board will add wireless XBee control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!

IBoard Pro can be used as an Ethernet, wireless communication project development platform. IBoard Pro support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. You can setup a web server through which you may communicate with a remote Arduino using XBee radios, bluetooth or APC modules. This information can be posted to a web site, or to Twitter.

The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Iboard can be powered by a mini USB , power Jack or POE.

Documents

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.

Technical support

For technical support, please open a ticket on Itead Support System.

specification

Microcontroller ATMega2560
Max Frequency 16MHz
RAM Capacity 8K
FLASH Capacity 256K
External Resources
  • Onboard SD socket
  • Onboard Ethernet
  • Display
  • Electronic Brick Interface
Power Supply
  • External 12V
  • External 24V
  • External 7V
  • External 9V
I/O Operation Level 3.3V
Board Size 124.46mm x 72.39mm
Model IM120724002
Version 1.0
Weight 80.00g
Accessories No

Download

Datasheet

Schematic

Demo Code

Fritzing Parts

Reviews

Customer Reviews

Everything I need (almost) Review by Mike
Quality
Price
Value
I've been using a Arduno Mega2560 with separate ethernet shield and DS1307 RTC. The IBoard Pro does everything on one board and without the flaky connection between the mega and the ethernet shield. It does all this and more for a fantastic price too.

I downloaded my unmodified software and it worked just like my other setup first time.

The only request I would make is concerning the DS1307. This RTC chip has a square wave output on pin 7 which is not connected to anything on the IBoard Pro. It would be useful if this pin was connected to a jumper so that it can be used without having to solder directly to the chip.

(Posted on 1/26/14)
Good but with some errors Review by JoeM
Quality
Price
Value
I recently purchased 2 of these boards, I was many hours trying to make the SD from the LCD module to work, there is a critical error with this board, the chip select for the SD module in the LCD connector should be the pin#53 and it is connected to the microcontroller pin#4 so the CS of the LCD connector is the same as the microSD CS of the board, so you will not be able to use two cards, just one.

I have not tested more things but by now it is a bothering issue with this board

(Posted on 7/20/13)
Everything is wonderful Review by Yuriy
Price
Value
Quality
In order to use the library TinyFAT, you need to select which pin to use for the SS signal:
...
file.setSSpin(4);
file.initFAT();
... (Posted on 6/3/13)
Overall good, but ... Review by Dmitryi
Price
Value
Quality
All is well in the motherboard, one upset me the inability to use the library TinyFAT, without it my project is not done, is forced to buy Mega 2560: ( (Posted on 3/11/13)
Brilliant! Superb combination of functions Review by Mathias
Price
Value
Quality
Salut,
I am currently evaluating the board and so far, the board is excellent and offers the functions of ethernet, SD card, RTC and ITDB02 interface for the price of a normal Arduino Mega.
I used a 3.2" TFT with the board and it worked right away.
I used a 8x32 LED Matrix (with TFT removed to free up the pins)
The full review can be found at http://www.mathias-wilhelm.de/arduino/arduino-boards/itead-iboard-pro
The review is in English and German
Ciao, Mathias (Posted on 12/19/12)

Only registered users can write reviews. Please, log in or register

You can use it with the following product(s)

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.