Iteaduino UNO - Blue

What's NEW?

--> What's the different between Iteaduino UNO and Itaduino ? It does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U28programmed as a USB-to-serial converter, and use the UNO bootloarder instead of Duemilanove bootloader. When you upload the program of Arduino IDE,  choose the "Arduino UNO" under the "Tools"->"Board" memu , not the "Arduino Duemilanove or Nano w/ ATmega328".

Overview

The Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Feature

• New external IO pin map
• Efficient DC-DC Power supply with wide range input.
• 3.3V/5V Operating Voltage selection
• All pins out for Sensor and Servo
• UART/IIC interface breakout

Hardware